Home/Services/Stump Grinding

Stump Grinding in Townsville

Stumps taken out below the surface

A removal is not finished while there is still a stump in the lawn. We can grind any stump, whether we took the tree out or someone else did.

A worker cutting a felled trunk down at ground level on a lawn
Stem taken back to a stub, then the grinder goes below the surface.

The job is not finished with a stump in the lawn

A stump left in the ground is a trip hazard, a mower killer, a termite invitation and, with a lot of our local species, the start of a thicket of suckers you will be fighting for years.

We grind stumps out below the surface so the ground can be used again. Turf over it, pave over it, put a garden bed on it or replant. The chips from the grind get raked back in as backfill, or taken away if you would rather start with clean soil.

How deep and how wide

Standard is around 250 to 300mm below the surrounding surface, which is enough for turf, topsoil and most garden beds. If you are paving, pouring a slab or putting a footing anywhere near it, tell us and we will go deeper and chase the main laterals as well.

The grind is always a bit wider than the stump looks. Buttress roots flare out below the surface, and leaving them means the ground keeps sinking as they rot down over the next few years.

Before we turn up

  • Mark any irrigation, sprinklers, garden lighting or dog fence wire near the stump
  • Let us know about services: water, gas, power, comms and any old pipe runs
  • Clear pots, ornaments and furniture from a couple of metres around it
  • If access is through a gate, measure it and tell us the width

Any stump, not just ours

We are happy to grind stumps left behind by someone else, including old ones that have been sitting for years. Send a photo with something for scale and we can usually price it without coming out.

On the tools

What the job looks like

Below the surface, wider than the stump looks, then raked back level.

Cutting the stem back to a workable stub
Cutting the stem back to a workable stub
Blown down and raked off before we leave
Blown down and raked off before we leave

The detail

What you get

Depth

250 to 300mm

Standard grind below the surrounding surface. Deeper on request for paving and footings.

Finish

Backfilled and raked

Chips raked back in as backfill, or removed if you want clean soil to start with.

Access

Gate width matters

Measure it and tell us. It decides which machine comes and what the job costs.

Any stump

Not just ours

Old stumps from someone else's removal are fine. Send a photo with something for scale.

Questions

Asked and answered

If yours is not here, ring us. We would rather talk it through than have you guessing at it.

How deep do you grind?

Around 250 to 300mm below the surrounding surface as standard, which suits turf, topsoil and garden beds. If you are paving or pouring, tell us and we will go deeper and chase the laterals.

Can I plant a new tree in the same spot?

Not straight into the grindings. Wood chip in the hole ties up nitrogen as it breaks down. Either take the chips out and backfill with soil, or plant a metre or so off the old centre.

Will the ground sink later?

Not if enough of the buttress roots have been taken out. That is why we grind wider than the stump looks. Leave those and the ground keeps settling for years as they rot.

Do you grind stumps you did not create?

Yes, including old ones. Send a photo with something in it for scale and we can usually price it without a site visit.

Free quotes, Bowen to Townsville to Mission Beach

Need stump grinding in Townsville?

A free quote, a proper look at the tree and a detailed written price. Send a photo through or ring us, and you will hear back today.

Call now Free quote